Pages

Monday, November 12, 2012

Stitched Resist Results/Tutorial


I had quite a few people ask me to share my process so I thought I would do a mini tutorial. 

You will need Mx dyes, urea, print paste, soda ash and a paint brush. 


1. Prepare the print paste mix the night ahead. I started with 2 cups of water , 2T urea and 2 T print paste. It was way too runny so I added a few more tablespoons until it was like syrup. It thickened overnight to the consistency of thick honey which was perfect.

2. I had stitched this piece of cotton with my design of choice using upholstery thread. I pulled the threads tight and tied a square knot in about 3 threads at a time.
Stitched and tied piece ready to dye
3. I mixed my soda ash a little stronger than usual-1/4 cup to 1 Liter. I applied the soda ash to the piece using a brush as I really didn't want it soaked through. I wanted to see more white than actual color in the back ground. 

4. Dyes were mixed stronger than usual too: 30 grams MX dye, 2 T urea and 250 milliliters of water. 

5. I added some of the mixed dyes to the print paste and stirred it thoroughly. I used Prochem's deep navy, tangerine and loden which is an olivey green. 

Dyes mixed and added to the print paste

6. I again used a paint brush to apply the dye/print paste mixture.


Print paste and Dye mix applied
7. I covered it in plastic wrap so it wouldn't dry out and let it batch  overnight.
Covered in plastic to batch in a warm place overnight
8. The next day I carefully cut the tied threads and pulled it out prior to rinsing. I really need a seam ripper, tweezers and my small scissors. It was time consuming but exciting to see the reveal.

Pulling out the threads prior to rinsing

9. Then I rinsed in cold, then hot and popped it in the washing machine with a little synthrapol.

final piece

close up
I didn't look at my surface design notebooks or the many books I have....I was impatient and was just winging it but it turned out really pretty.  I am sure the many books out there have more concise instructions but this is how I did it!

I am going to pick out some of my hand dyed embroidery threads and have a new stitching project to work on.

5 comments:

  1. What FUN! Love your result and can hardly wait to see it with the stitchery.

    ReplyDelete
  2. Reminds me a bit of Susan Cavanaugh's work (http://www.suecavanaughart.com/Gallery1.asp)...I've always wanted to take a workshop from her! Nicely done!

    ReplyDelete
  3. Nellie-layered and stitching away!

    Robbie-Definitley Sue Cavavaugh-ish with a little Elin Noble stitching ! Trying to put what I have learned into practice. Thanks for the link.

    ReplyDelete
  4. How fun, I'm going to have to try that myself. I love the colors too.

    ReplyDelete
  5. thanks for the great instructions...I have been trying to do this but without the print paste...and that should help me ALOT

    ReplyDelete